Knowledge Base / Frequently Asked Questions / Device ManageR

Software & Drivers.Note: Individual products can be found by searching the site via keyword or by selecting one of the link categories listed under the 'Products' main menu found in the header. To browse and download files and software specific to Motion and Optical Measurement as well as certain obsolete products, visit download.newport.com.

Download usb serial (communication class. For complete description of USB CDC class requests, refer to Universal Serial Bus Class Definitions for Communications Devices specification.Communication Interface Management Element RequestsThe management element requests control and configure the operational state of the communications device.

When you set up your GSM or voice modem in AVTECH’s Device ManageR, you’ll need to enter its COM port in Settings–>External Modems.

Adaptec aic-7892 - ultra160 scsi driver installer. Before you attempt to check the modem’s COM port:

A. Plug the modem into a USB port on Device ManageR’s host system.

B. Install the most recent version of the modem’s drivers.

Search by Vehicle. Prolific Driver 3.2.0.0 recommended for Vista, Win7/8/10 3.2.0.0 exe 3.2.0.0 zip (32/64 bit) - XP: If you are using Win XP, the Prolific driver 2.0.2.1 will run with no issues. This driver for Win XP can be found here: 2.0.2.1.zip - MacOS The recommended Drivers and Info can be found at the bottom of this page. Vivitar on trend consumer electronics digital cameras, action cameras,hair tools, beauty tools, smart home, optics, steam toys, daily deals. The world’s largest library of business book summaries. Expand your business knowledge with summaries you can read in 10 minutes or less.

Then check the COM port by following these steps:

1. On Device ManageR’s host system, navigate in Windows to Start–>Control Panel–>System and Security–>System–>Device Manager.

2. In the Device Manager screen, double-click on Modems to expand the list.

3. Locate your modem and right-click on it.

4. In the menu that appears, select Properties.

5. In the Properties window, select the Modem tab.

6. You’ll see ‘Port: COMX,’ where X is the COM port number. In this example, the COM port is COM4.

7. To enter this COM port in AVTECH’s Device ManageR software:

– Navigate to Settings–>External Modems.

– In COM Port, click on the drop-down menu and select the correct one from the list. In our example, we’re selecting COM4.

Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98

Important note regarding Windows 7 and Vista:
The driver MUST be installed 'as Administrator'
Right-click the downloaded EXE file and choose Run as administrator

Download the Windows installer for the USB RS-232 adaptor:
Download for Windows 7/Vista/XP (32-bit)
Download for Windows 7/Vista (32-bit and 64-bit)

If for some reason the above driver does not work, try one of the following:
Download for Windows 7/Vista/XP (32-bit and 64-bit - Alternate driver)
Download for Windows XP, 2000, 98/ME (32-bit only)

For older cables (purchased prior to October, 2010):
Download for Windows 7/Vista/XP (32-bit and 64-bit)
Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation

1) Open the Device Manager dialog from Control Panel

• Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
• Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager
  

2) Click the plus sign (+) next to 'Ports'.

3) If the device is properly installed, 'Serialio.com USB Serial Port' or 'Prolific USB-to-Serial COM Port' will be displayed.

The software driver is properly installed, but the USB-RS232 adaptor does not work as expected

One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)

If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE

Windows XP

1) Follow steps 1-3 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) In the 'COM Port Number' drop-down select the desired port number. For example if the software requires COM2, select COM2. Note the COM port must have '(in use)' listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click 'OK.'

5) Click 'OK' again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.

6) Close the Device Manager. Launch the software to use with the new COM port.

Abstract Control Model) (com4) Drivers

Windows 2000, Me, and 98 SE (Second Edition)

1) Follow steps 1 2 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties.

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) Uncheck 'Use automatic settings'.

5) Select 'Input/Output range'. Click on 'Change Settings'.

6) Type '02E8-02EF' in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

• COM 1: 03F8-03FF
• COM 2: 02F8-02FF
• COM 3: 03E8-03EF
• COM 4: 02E8-02EF

Abstract Control Model) (com4) Driver Free

7) Enter the value, then click OK. Click OK again, then click Yes when the 'Creating a Forced Configuration' window appears. Click OK.

8) Restart the computer. The Device Manager can be checked, to see the COM port change.

Abstract Control Model) (com4) Driver Windows 10

Note: Adaptor may not be exactly as pictured above.
back